$80.79 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 312432114871
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:K640176 K90355 K90357 EV400 ES3525 ES3524 K90715
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does not apply
Manufacturer Part Number:TA81404601P
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm,Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Quantity:10 Pcs
Cross Part Number:1J0407365C,1J0407366C,1J0422812B,1J0422811B,1J0407151B
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
eBay 1.Fit For 2001-2010 VW Beetle With Sport Suspension Steering & Suspension Kit 2006 VW Golf (8th Vin Digit J) With Sport Suspension Steering & Suspension Kit 2001-2005 VW Golf (excluding R32 Models) With Sport Suspension Steering & Suspension Kit 2005 VW Jetta (8th Vin Digit J or M) With Sport Suspension Steering & Suspension Kit 2000-2004 VW Jetta With Sport Suspension Steering & Suspension Kit 2.Package Includes: For 2001-2010 Volkswagen Beetle 10pc Steering Tie Rod Ends Ball Joints Sway Bars 1.Fit For 2001-2010 VW Beetle With Sport Suspension Steering & Suspension Kit 2006 VW Golf (8th Vin Digit J) With Sport Suspension Steering & Suspension Kit 2001-2005 VW Golf (excluding R32 Models) With Sport Suspension Steering & Suspension Kit 2005 VW Jetta (8th Vin Digit J or M) With Sport Suspension Steering & Suspension Kit 2000-2004 VW Jetta With Sport Suspension Steering & Suspension Kit 2.Package Includes: 1x Part# Front Lower Ball Joint – Driver Side – K90355 1x Part# Front Lower Ball Joint – Passenger Side – K90357 2x Part# Front Lower Control Arm – K640176 2x Part# Front Sway Bars End Links – K90715 1x Part# Front Outer Tie Rod End – Passenger Side – ES3524 1x Part# Front Outer Tie Rod End – Driver Side – ES3525 2x Part# Front Inner Tie Rods Ends – EV400 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K640176 K90355 K90357 EV400 ES3525 ES3524 K90715 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81404601P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 10 Pcs Cross Part Number : 1J0407365C,1J0407366C,1J0422812B,1J0422811B,1J0407151B Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales Pair Front Wheel Bearings For Chevrolet Impala Buick Pontiac Grand Prix Montana USD 62.35 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 16.81 2 X Front/Rear Wheel Hub Bearing For Buick LaCrosse Century Chevy Impala Venture USD 63.53 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 13.49 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 26.85 Newly Listed Left+Right Power Memory Heated Signal Chrome Mirrors For GM Pickup USD 150.49 Black 66209261580 PDC Parking Sensor For BMW 328i xDrive Base Wagon 4-Door USD 58.89 20pcs CKP Crankshaft Position Sensor Fit For Buick Regal Verano Buick LaCrosse USD 209.09 20pcs Bumper Parking Aid Sensor Fit For Honda Odyssey CR-V 39680-SHJ-A61-ZB USD 194.40 Manual Fold RH Side Mirror For 2003-2006 Jeep Wrangler TJ Black 55395060AB USD 30.99 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us For 2001-2010 Volkswagen Beetle 10pc Steering Tie Rod Ends Ball Joints Sway Bars 1.Fit For 2001-2010 VW Beetle With Sport Suspension Steering & Suspension Kit 2006 VW Golf (8th Vin Digit J) With Sport Suspension Steering & Suspension Kit 2001-2005 VW Golf (excluding R32 Models) With Sport Suspension Steering & Suspension Kit 2005 VW Jetta (8th Vin Digit J or M) With Sport Suspension Steering & Suspension Kit 2000-2004 VW Jetta With Sport Suspension Steering & Suspension Kit 2.Package Includes: 1x Part# Front Lower Ball Joint – Driver Side – K90355 1x Part# Front Lower Ball Joint – Passenger Side – K90357 2x Part# Front Lower Control Arm – K640176 2x Part# Front Sway Bars End Links – K90715 1x Part# Front Outer Tie Rod End – Passenger Side – ES3524 1x Part# Front Outer Tie Rod End – Driver Side – ES3525 2x Part# Front Inner Tie Rods Ends – EV400 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K640176 K90355 K90357 EV400 ES3525 ES3524 K90715 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81404601P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm,Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 10 Pcs Cross Part Number : 1J0407365C,1J0407366C,1J0422812B,1J0422811B,1J0407151B Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.
Frequently Asked Questions About For 2001-2010 Volkswagen Beetle 10pc Steering Tie Rod Ends Ball Joints Sway Bars in My Website
reachthemilestone.com is the best online shopping platform where you can buy For 2001-2010 Volkswagen Beetle 10pc Steering Tie Rod Ends Ball Joints Sway Bars from renowned brand(s). reachthemilestone.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling For 2001-2010 Volkswagen Beetle 10pc Steering Tie Rod Ends Ball Joints Sway Bars on reachthemilestone.com?
reachthemilestone.com helps you to shop online and delivers Burberry to your doorstep. The best-selling Burberry on reachthemilestone.com are: Burberry Classic Eau De Parfum 3.3 oz For Women Spray (old formula) New Burberry Scarf Beige Check Haymarket Gray Border Silk Unisex Wrap Men’s Burberry Black Polo Daisy Floral Trim Rare Exclusive Size XL London White Burberrys Long Sleeve Button Up Shirt Men’s Size Medium Red Ducks Made In USA burberry brit polo shirt mens size large GUC 2010s Burberry Touch for Men 3.3 oz Eau de Toilette Spray NEW IN BOX 100% AUTHENTIC Burberry Body Tender 0.15 oz /4.5 ml Splash Women – Mini Size- Read Description burberry trench coat – Camden – Authentic – Mac – Vintage – Womens 16 Uk (12 US) BURBERRY men’s shirt, size large, khaki, long sleeve. DS07 Vintage Burberrys Of London Dress Shirt Mens 16 – 35 Button Down Made in USA Burberry Weekend by Burberry, 1 oz EDP Spray for Women Burberry Her Elixir de Parfum for Women 3.3 fl. oz. / 100ml Burberry Beige Vintage Cosmetic Makeup Vanity Pouch Bag Authentic BURBERRY S Sshirt #270-003-917-9989 Burberry Summer 3.3oz 100ml Eau De Toilette cologne for men As pictured Burberry Check Cotton Shirt Authentic BURBERRY Shirts #270-003-940-7327 Burberry Weekend M 100Ml Boxed Burberry Brit Men’s Cotton Novacheck S/S Button Shirt Blue Gingham Plaid XL BURBERRY London XL Long Sleeve Button Mens Shirt Brown Blue Made in USA Runs Big Burberrys of London Mens Shirt 16-35 Blue Check Button Up Long Sleeve Burberry Women’s Eyeglasses Check Brown Plastic Cat Eye Shape Frame 0BE2325 4005 Burberry Her for Women Roll On Oil YZY Perfume 12 ML 3pk Burberry Touch by Burberry for Women 1.0 oz/30 ml EDP Spray Brand New in Box Burberry London size M Men’s Green White Striped Button-Down Shirt Burberry The Beat Men 3.3 oz 100 ml Eau De Toilette Spray New Packaging Sealed Burberry Brit Rhythm EDT Spray for Men 50 ml/ 1.7 oz Discontinued NIB Sealed VINTAGE Burberry London Novacheck Shirt Mens Large Beige Long Sleeve Button Down Burberry Orange Silk Shirt TBMap Shirt Monogram Size 8 (XS) RRP £890 Burberry Hero Men 3.3 oz 100ml EDT Eau de Toilette Spray for Him NEW SEALED BOX Burberry Ladies Dark Canvas Blue Heart-Motif Skinny Jeans Allen Edmonds Check Plaid Shirts Blue Red Excellent (set 2) Burberry Ladies Rose, Pink Damask Velvet Jacquard Tailored Coat, Brand Size 4 Burberrys Tartan Check Striped Button Shirt M Medium Gray Long Sleeve Imported Burberry Cologne For Men Collection Sample Spray Vial 4pc Set Men’s Burberry Brit Button-Up Shirt Striped Cotton Sz L Burberry shirt for men Men’s Burberry London Button Down Shirt Micro Nova Check Made in USA Sz XL BURBERRY LONDON BLUE CASUAL OR FORMAL CLASSIC FIT SHIRT MEN’S 16 1/2-42R $270 Burberry Mens XL Blue Nova Plaid Buttom Up Long Sleeve Dress Shirt Burberry Brit by Burberry. Read the description! ROUND RETRO KEYHOLE MEN WOMEN READERS BLUE LIGHT BLOCKING COMPUTER READING Vtg Burberrys of London Shirt Men’s 16-35 White Striped Button Down Made in USA MR Burberry By Burberrys 0.16 oz/ 5 ML Edt Splash Mini For men New In Box BURBERRY HER EAU DE TOILETTE 0.16 fl oz / 5 ml MINIATURE SPLASH FOR WOMEN BURBERRY Her Elixir Eau de Parfum 3.3 fl oz Original Package Qty 4 Burberry Brit Rhythm Floral Women Perfume edt Mini Splash 0.17 oz New Burberry London Men’s Shirt Nova Check Size Large Brown/Green Made in USA Burberry of London Shirt Mens L Multicolor Striped Long Sleeve Collared BURBERRY SPORT Eau De Toilette for Women 0.25 oz – NEW Travel Size Spray Burberry London Shirt Mens Large Button Up Beige Plaid Cotton *Read Burberry Touch by Burberry 1.7 oz EDT Cologne for Men New In Box Burberry Body Tender 2.0 / 60ml Eau De Toilette Spray for Women Burberry Hero Hair & Body Wash Shower Gel for Men MINI 1oz, 30ml New w/o Box Burberry Hero For Men Parfum 0.16 fl oz/5 ml Travel Splash Mini Size New In Box Burberry London Eau de Toilette for Men Mini – .15 oz. – Boxed BURBERRY BE4388U 300213 Sunglasses Dark Havana Frame Brown Gradient Lenses 55mm Burberry Brit Shirt Mens Medium Pink Plaid Novacheck Long Sleeve Button Up Adult Burberry Brit Shirt XL Extra Large Red Button Down Plaid Check Burberry London Fabric for Women 3.3 oz Eau de Parfum Spray NIB 100% AUTHENTIC BURBERRY havana/brown gradient VANESSA BE4375 401713 55 sunglasses NEW IN BOX! Large Burberry hard sunglasses/eye glasses case magnetic eyeglasses Black Burberry London Shirt Mens Button Up 16-41 L Tailored Fit Black White Checked Mini Perfume Lot Hermes, Dior, Burberry, Gucci, Tiffany, Chloé, YSL. Women Burberry The Chelsea Short Coat Midnight Made in UK8 US6 IT40 Burberry Hero Eau de Parfum Spray 1.6 FL OZ Men Burberry Goddess Eau de Parfum Sample Size 1.5ml (4pcs) 5 x Burberry Her Blossom Eau de Toilette EDT Sample Spray 1.5ml each Burberry B 4122 3001/T3 Sunglasses Polished Black Classic Plaid Polarized w/case Burberry Classic W 30ml Boxed Burberry Men’s Navy Red Plaid LS Button Up Down Shirt Size XL AUTH MEN’S Burberrys VINTAGE BURBERRY SHIRT SIZE 15.5 – 39 P2P 22.4″ ~ TALL “L” Brit For Him By Burberry 5ML Edt Splash. BURBERRY BRIT SUMMER EDITION EAU DE TOILETTE SPRAY 3.3 OZ / 100 ML NIB – SEALED BURBERRY Kisses Gloss moisturizing gloss #Cameo Nude No.21 – 0.2 oz – NIB Burberry Eye Colour Wet & Dry Silk Shadow No.101 STONE 0.09oz (DAMAGED) 12x BURBERRY HERO EAU DE TOILETTE 0.05 fl oz MEN (12 Carded Spray Vials) Sealed Burberry London Dark Grey Check Pattern Plaid Button Up Shirt Mens Size Small Burberry Eyeglasses BE2283 3544 52mm Dark Grey / Demo Lens Burberry London Shirt Adult 18 Big Blue Striped Button Up Long Sleeve USA Mens 2 Burberry FRESH GLOW LUMINOUS FLUID BASE Primer Highlighter NUDE RADIANCE .40oz Burberry Lighweight Packable Garment Bag, Brand New,Good For Travel/ Preserving Burberry Weekend by Burberry 3.4 oz EDT Cologne for Men New In Box Burberry (10686) Eau De Toilette “Baby Touch” Women’s Perfume 3.3 Fl Oz Burberry London Shirt Mens 16.5 White Striped Button Up Long Sleeve Burberry Edward Antique Yellow IP Check Mens Cotton Short Sleeve Shirt L 8003852 2pair Designer Unisex Socks Adult Size6-10 Burberry London X-Large Nova Check Mens XL Button Up Front Shirt Made in USA VTG Burberry London Striped Monogram Button Up Black Shirt Size Medium Burberry London Vintage Men’s Striking Nova Check Plaid Long Sleeve. Medium. Burberrys Of London Shirt Mens Medium Blue Plaid Long Sleeve Made In USA Burberry London Houndstooth Plaid Button Up Mens Shirt XL Made in USA READ Burberry For Men Eau de Toilette 3.3 oz / 100 ml Spray For Men BURBERRY by Burberry 3.3 OZ EAU DE PARFUM SPRAY NEW for Women Burberry Brit Pink Nova Check Plaid Button Short Sleeve Shirt Mens SIZE Large Burberrys Of London Shirt Mens 16-35 White Blue Striped Vintage Made In USA Burberry London Tall Stripe Blue USA Made Men’s Shirt Size L BURBERRY for MEN by Burberry 30 ml/ 1.0 oz Eau de Toilette Spray NIB Old Version Burberry Brit Mens Light Gray Button Down Plaid Shirt Size Medium Top Beautiful Men’s Size 17 Burberry Blue Striped Long Sleeve Button Shirt GUC Mens Pullover Fleece Hoodie